FunctionDeauther Attack: Disconnect 2.4G WiFiDeauther Beacon: Create fake networksDeauther Probe：Confuse wifi trackersPacket Monitor：Display wifi trafficGPIOs and Hardware infoDisplay: SH1106 1.3″ OLEDDisplay SDA: GPIO 5Display SCL/SCK: GPIO 4WS2812b LED: GPIO 15Button Up: GPIO 12Button Down: GPIO 13Button Select: GPIO 14Buzzer: GPIO 0Side Button: RSTDouble Arcylic ProtectionTransparent CaseSoft sillica gel strap500 mA charging currentIndicate charging LED (RED will turn off when full)ESP12F InsidePower SwitchProtection: short, overcharging, over discharging, temperatureMore InfoDeauthCloses the connection of WiFi devices by sending deauthentication frames to access points and client devices you selected. This is only possible because a lot of devices don’t use the 802.11w-2009 standard that offers a protection against this attack. Please only select one target! When you select multiple targets that run on different channels and start the attack, it will quickly switch between those channels and you have no chance to reconnect to the access point that hosts this web interface.BeaconBeacon packets are used to advertise access points. By continuously sending beacon packets out, it will look like you created new WiFi networks. You can specify the network names under SSIDs.ProbeProbe requests are sent by client devices to ask if a known network is nearby. Use this attack to confuse WiFi trackers by asking for networks that you specified in the SSID list. It’s unlikely you will see any impact by this attack with your home network.
