HLK-GW105 is a high-performance embedded 5G module launched by Hailink Electronics. The module complies with IEEE standard 802.11a/b/g/n/ac/ax. The module integrates a 2.4G/5.8G radio frequency transceiver and has advanced transmission rate features. Product Features: • IEEE 802.11 a/b/g/n/ac/ax compliant • Dedicated high-performance 32-bit RISC CPU • Supports 20/40MHz bandwidth in 2.4GHz band and 20/40/80MHZ bandwidth for 5G • Support 2.4g/ 5.8 GHz band, data rate up to 573 1201Mbps • Support STA/AP two working modes • Built-in TCP/IP protocol stack • Support over-the-air upgrade (OTA) • Single 3.3V Supply Operation HLK-GW105 product advantages: 1) Quectel 5G module solution enjoys high-speed network; Quectel RM500Q-CN module is adopted, supporting M.2 packaging of 5G/4G/3G network standards and comprehensive coverage of 5G and LTE-A network standards. 2) 5GHzWiFi5 technology, faster transmission rate; supports 2×2 2.4G (20MHz 433Mbps) and 2×2 5G (40MHz 867Mbps), 10 times faster than traditional single 2.4G network transmission rate. In particular, compared with the standard 150Mbps gateway solution, WiFi5 technology can significantly improve the data transmission speed of the device. 3) Dual-core CPU, more robust working performance; integrated MIPS® 1004KEc™ dual-core CPU, single-core central frequency up to 880MHz, can support data forwarding of Gigabit Ethernet port and Gigabit dual-band WiFi, and data transmission is smoother. 4) Support stable connection of multiple terminal devices; theoretically, the number of simultaneous connections is 32; IoT communication scene application integration solution requires more devices to connect to the Internet stably at the same time, adopts MT7621A MT7612E chip solution, stable and reliable performance. In practical applications, it is generally recommended to connect about 20. HLK-GW105 development board interface description: Specifications: Basic parameters: Web standards Wireless Standard: IEEE802.11b/g/n/ac; Wired Standard: IEEE 802.3 IEEE802.3u Frequency Range 2412-2.4835GHz/5.180-5.825GHz Transmit power 14-22dBm Receiver sensitivity -75dBm~-88dBm Number of channels 1-1436-173 Antenna type External antenna*2 Function parameter: Operating mode Router/AP/STA/AP Client/Bridge Wireless security Wireless MAC address filtering/wireless security function switch 64/128/152 bit WEP encryption WPA-PSK/WPA2-PSK, WPA/WPA2 security mechanism Network protocol IPv4, TCP/UDP Configuration method AT command configuration, web configuration Firmware upgrade Serial port upgrade, wireless upgrade, network port upgrade Serial port to network: Serial baud rate 1200~921600bps (default 115200) TCP/UDP 20-30 pieces Hardware parameters: Chip solution MT7621A MT7612E RM500Q Memory/Flash 128MB/16MB Hardware interface UART/I2C/PWM/SPI/USB2.0 Physical dimension 140*100*16.8mm (without stand) Environmental standards Working temperature: -20~ 60℃ Working humidity: 10%-90%RH (non-condensing) Storage temperature: -40~ 85℃ Storage humidity: 5%-90%RH (non-condensing) Power requirements: Supply voltage 12V 1/O voltage 3.0-3.6VDC (typically 3.3VDC) Supply current ≥1500mA (typical) Power supply ripple 50mV Application fields: • Smart home devices; • IoT control; • Remote monitoring/control; • Outdoor Internet access; • Internet equipment; • Internet traffic; • Home gateways, set-top boxes, etc.
